Bolts, FFS Badges and Caster Eliminator Plates Sold Separately. Add from menu on right.
This is for a pair of Radius Long Arm links to replace your parallel control arms on a 2nd or 3rd or 4th gen ram, or when using a 2nd or 3rd gen front axle under your custom application. Welding required, universal type kit, could be used to transplant these axles under most any frame. These are able to be adjusted for any amount of lift you have or are wanting. All set for 9/16 Hardware (Click link to purchase or add to cart) and 2 Pairs of our for caster eliminators for 94-99 or 00-13 (Click link to purchase or add to cart) to eliminate the slide type caster adjuster that’s part of the lower caster adjustment on the axle. With this setup your arm length adjustment is handled by the 1.25” rod end at the frame and the caster adjustment is handled by the upper part of the radius arm and it’s 7/8 rod end.
The lower tubes are 47inches long 2″ x .211″ wall tubing and the uppers are 24 inches long 1.5″ x .211″ tubing extra long cut to fit for your application. The lower heim is a 1.25″ Heat treated heim with your choice of misalignment size. Optional greaseable rebuildable flex joint. The Chassis Link Bracket hole size is 9/16″. The upper is 7/8″ Heat treated joint with 9/16″ zinc misalignment.
